Six10 Thickened Epoxy Adhesive

Item #: 655-610

Availability: In Stock
Usually ships In 1-2 Business Days

Retail: $24.95 Price: $14.95
You Save: $10.00 (40.1%)

Quantity

Six10 is for permanent, waterproof, structural gap filling and gluing

Description
Material Safety Data Sheet
Six10 Introduction

Offered in a convenient, self-metering cartridge, Six10 is for permanent, waterproof, structural gap filling and gluing. Bonds to wood, fiberglass, metals and masonry. With the included 600 Static Mixer attached, you can dispense fully-mixed adhesive right where you need it, using a standard caulking gun. Working time is 42 minutes at 72°F, it cures to a solid in 5-6 hrs. and takes high loads in 24 hrs.

* Cartridge contains 190ml (6.42oz.) of resin and hardener

The MSDS on this web site are presented in PDF format. Adobe Acrobat is required to read these files. A FREE copy of Acrobat Reader can be downloaded by clicking here: Acrobat Reader

MSDS:

610 Six10™ Adhesive, Part A (Resin)

610 Six10™ Adhesive, Part B (Hardener)

Six10 Introduction

Six10™ Thickened Epoxy Adhesive combines the strength and reliability of a two-part WEST SYSTEM® Brand Epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds tenaciously to wood, metals, fiberglass and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun.

Six10's shear thinning properties make it "thinner" as it's worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Six10 stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies.

Each tube of Six10 comes equipped with a static mixing wand.

Introducing Six10 (PDF)

Properties (PDF)

Practical tips (PDF)