Topside paint is applied above the waterline of your boat.
Primers, sealers, and undercoatings for use with all metal, epoxy, fiberglass, wood, and other surfaces.
Various paint thinners, mineral spirits, solvents, cleaning, and reducing agents for brushing and spraying
Paint additives are used to change the final product of your paint or adapt the paint to the current... working environment.
Pettit
120/T-10 Brushing Thinner
A good general purpose thinner to keep on hand
Pettit 120/Z Spar T-10 medium brushing thinner is designed for spraying in hot weather and brushing in most conditions. This is a general purpose thinner used in most paint products for ease of...
[more info...]
Availability: In Stock
Retail: $23.39
Price: $14.95
|
Pettit
121 Spraying Thinner
For spraying and reducing standard enamels and undercoaters
Fast-evaporating solvent for reducing standard enamels and undercoaters for spray application. Flashes out rapidly to allow application of a tack coat prior to final coats.
[more info...]
Availability: In Stock
Price: $17.49
|
Pettit
185 Ablative Thinner, Quart
Item #: 93-185Q -
Pettit 185 Ablative Thinner is designed specifically for thinning Pettit ablative antifouling paints.
Add up to 10% thinner to Ablative Paints when brushing or rolling the paint on warm or windy days. Add 15% thinner when spraying. For priming bare wood, add 20-25% thinner to insure good penetration...
[more info...]
Availability: In Stock
Retail: $35.79
Price: $20.59
|
Interlux
202 Fiberglass Solvent Wash
Interlux 202 solvent wash is a combination of several solvents.
202 Fiberglass Solvent Wash is a combination of several solvents, some of which are very slow to evaporate from the surface of gel coat being wiped. This characteristic is very important because the...
[more info...]
Availability: In Stock
Price: $13.49
|
Interlux
216 Special Thinner Solvent
Versitile thinner speeds drying in cold climates
Interlux 216 Special Thinner is a fast evaporating solvent which when added to specified paint coatings improves drying in cold climates, and facilitates spray application. 216 Thinner is also...
[more info...]
Availability: In Stock
Price: $10.95
|
Interlux
2316N Spray Thinner
Specific solvents for altering the brushing, rolling or spraying characteristics of specific paints
Interlux Reducing Solvent 2316N is a fast evaporating solvent to be used in specific two-part polyurethane, perfection, perfection varnish, and epoxy products. Interlux 2316 is the spray thinner for...
[more info...]
Availability: In Stock
Price: $12.49
|
Availability: In Stock
Retail: $27.99
Price: $18.49
|
Interlux
333 Brushing Liquid Solvent
Prevents paint from "flashing off" prematurely in hot weather
Interlux 333 Brushing Liquid is a slow drying solvent to ease brushing and facilitate the flow of specified paint coatings. Extends drying in hot weather. Also recommended in various topside systems...
[more info...]
Availability: In Stock
Price: $12.95
|
Interlux
355 Viny-Lux Solvent, Quart
Item #: 93-355Q -
Specifically formulated for use with vinyl-based paints and primers
Interlux Viny-lux Solvent 355 is the proper solvent for reducing for Viny-lux primewash, viny-lux antifoulings, Baltoplate and VC Offshore to ease brushing and for spraying.
[more info...]
Availability: In Stock
Retail: $18.49
Price: $12.95
|
Interlux
433 Brush-Ease Thinner, Quart
Item #: 93-433Q -
Makes brushing and rolling certain antifouling paints easier
Interlux Brush-Ease 433 is a slow drying solvent to ease brushing and rolling and to improve flow. Interlux Brush-Ease 433 should only be used in products where it is specified in the directions,...
[more info...]
Availability: In Stock
Retail: $17.99
Price: $11.95
|
AWLGRIP
545 Epoxy Primer
Item #: 98-D1001 -
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft./gal. Recoat in 12 hours.
Awlgrip 545 is a two component epoxy primer with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates. Also used to seal filler primers, and fairing work before...
[more info...]
Availability: In Stock
Price: $29.95
|
AWLGRIP
545 Epoxy Primer Converter
AwlGrip D3001 Converter for Awlgrip 545, a two component epoxy primer
Also used to seal filler primers, and fairing work before applying topcoats. May be applied by spray, brush, or roller. May be used above or below the waterline.
[more info...]
Availability: In Stock
Price: $29.95
|
Pettit
95 Fiberglass Dewaxer
Pettit Fiberglass Dewaxer is a special blend of solvents, formulated to cut through and remove mold release, grease, and previously applied waxes from the gelcoat.
Can be used above and below the waterline. Fiberglass de-waxing is necessary because visible and invisible release agents remain on the hull from the manufacturing process. Covers approximately 400...
[more info...]
Availability: In Stock
Price: $15.95
|
Availability: In Stock
Retail: $37.99
Price: $26.59
|
Pettit
Aluma Protect
Designed to form the ideal barrier coat over roughed bare aluminum.
Epoxy Primer for Aluminum
Strontium Chromate for Corrosion Control
Easy to Apply and Excellent Bonding Surface
Aluma Protect is an epoxy primer specifically formulated for use...
[more info...]
Availability: In Stock
Price: $49.95
|
AWLGRIP
Awl-Quik
Item #: 98-D8003 -
AwlQuik D8003 Awl Grip Primer is a quick drying, medium build, easily sanded, two component epoxy primer/surfacer.
Type: Epoxy Polyamide
Packaging: Available in 1 gallon and 1 quart containers
Theoretical Coverage: Sq. Feet/Gallon 609 Sq. Feet at one mil dry. 203-305 Sq. Feet at recommended dry film...
[more info...]
Availability: In Stock
Price: $34.79
|
AWLGRIP
Awlcat #2 Spray Converter
Awlgrip G3010 AwlCat #2 Converter is to be used with Awlgrip when spraying only or with AwlCraft 2000.
Theoretical Coverage - Sq. Feet/Gallon. Spray Application: 530 Sq. Feet at 1 mil dry film thickness. 210 Sq. Feet at recommended dry film thickness.
Recommended Wet Film Thickness: 6-9 mils...
[more info...]
Availability: In Stock
Price: $35.82
|
Availability: In Stock
Price: $46.95
|
AWLGRIP
Awlcraft 2000 Acrylic Urethane Topcoat
This two-component, fast-drying urethane coating provides a long-lasting, buffable finish with excellent gloss and color retention.
Theoretical Coverage: Sq. Ft./Gallon: 573 Sq. Feet at one mil dry. 230 Sq. Feet at recommended dry film thickness
Calculated for mixed base and converter, reduced 25%.
Coverage...
[more info...]
Availability: In Stock
Price: $42.99
|
Availability: In Stock
Price: $34.68
|