|
|
Home > Epoxy and Adhesives > Epoxy Resin >
MAS FLAG Epoxy Resin
MAS Flag Epoxy Resin
MAS FLAG is a resin designed for filleting, laminating, gluing, cold molding, and barrier coating. Mix with an appropriate MAS harderner in a 2:1 ratio. Pot Life: 15 min
MAS FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required.
MAS FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping.
MAS FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
*We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. | MEASURED PROPERTIES: | | | Resin Viscosity | 3000 - 3400 cps | | Color | 1 Gardener Max | | EEW | 190 - 200 | | Tg | 140° F | | Mix Ratio | 2:1 Resin:Hardener | | Peak Exohterm (30g batch) | 360° F | | Pot Life (30g batch) | 15 min |
|
|