Home > Paints, Thinners, & Additives > Paint Additives >
Awlgrip G3010 AwlCat #2 Converter
AwlGrip G3010 AwlCat #2 Converter
Awlgrip G3010 AwlCat #2 Converter is to be used with Awlgrip when spraying only or with AwlCraft 2000.
- Theoretical Coverage - Sq. Feet/Gallon. Spray Application: 530 Sq. Feet at 1 mil dry film thickness. 210 Sq. Feet at recommended dry film thickness.
- Recommended Wet Film Thickness: 6-9 mils (150-225 microns), total of 2-3 coats.
- Recommended Dry Film Thickness: 2-3 mils (50-75 microns), total of 2-3 coats.
- Coverage calculations are calculated for mixed base and converter, reduced 25% and are based on a theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipmen
- Anticipated Cure Time at 77°F/50% R.H: 24 hours to tape free; 3 days to light service; 14 days for full cure.
- Brush/Roller Application: 700-725 Sq. Feet at 1 mil dry 285 Sq. Feet at recommended dry film thickness.
- Recommended Wet Film Thickness: 4.5-6 mils (112.5-150 microns), total of 2 coats.
- VOC 4.9 lbs/gal (less water and exempt)
- Specific Gravity: 1.0
- % Solids by weight: 41 By volume: 36
- Density: 8.3 lbs/gal