Topcoat Accelerator

You Save: $19.49 (60.9%)

Item #	Description/Size	Availability	Qty Break	Price	Quantity
98-730142OZ	X-98 Fast Accelerator 2oz	In Stock	1	$12.49
98-730152OZ	X-138 Accelerator 2oz	In Stock	1	$12.49

Details
Specifications
More Information

Awlgrip Accelerators may be used to decrease dry and cure times in AwlGrip and AwlCraft 2000 Topcoats. Pro cure X-98 and X-138 are additives used in Awlgrip and Awlcraft 2000 topcoats.

DO NOT USE IN PRIMERS. *** SUGGESTED FOR PROFESSIONAL USE ONLY *

Temp (F)	Reducer	Pro-Cure Accelerator	Dry Time (Hrs)	Application Life (Hrs)
100	T0005, T0002	None	18-20	6-8
90	T0001	X-138/X-98	3-4/1-2	2-3/1-2
80	T0003	X-138/X-98	4-5/2-3	4-5/1-2
70	T0003	X-138/X-98	11-12/4-5	6-7/2-3
60	T0001	X-138/X-98	12+/6-7	6-7/3-4

Type: Accelerator additive
Packaging: 2 ounce bottles/12 per case
PRO-CURE#174 X-98 and PRO-CURE#174 X-138 are additives used in AWLGRIP#174 and AWLCRAFT#174 2000 Topcoats.
Mixing and Reduction: PRO-CURE#174 X-98 (73014) 1/2 liquid ounce per 2 gallons of mixed topcoat color base and converter.
This is the maximum amount; lesser quantities may be sufficient.
PRO-CURE#174 X-138 (73015) 1 liquid ounce per 2 gallons of mixed topcoat color base and converter.
This is the maximum amount; lesser quantities may be sufficient. Induction Time after Mixing: N/A
PRO-CURE#174 X-98 should only be used in spray applications.
PRO-CURE#174 X-138 may be used in both spray and brush applications.
Recoatability: AWLGRIP#174 Topcoats with a full add of PRO-CURE#174 X-98 may be recoated or taped in 4 to 6 hours at 77#176F, 50% R.H. AWLGRIP#174
Topcoats with a full add of PRO-CURE#174 X-1
VOC: 73015 - 951 g/lt or 7.9 lbs/gal 73014 - 888 g/lt or 7.4 lbs/gal

Application Equipment - This product is an additive component component. See instructions for the primary product application.

Surface Preparation - Additive component. Refer to the primary product application.

Mixing and Reduction - Pro Cure X-138 73015. 1 liquid ounce per 2 gallons of mixed topcoat color base and coverter. This is the maximum amount; lesser quantities may be sufficient. This is equivalent to 6 capfuls if measured using the screw top cap.

Application Instructions - Pro Cure X-138 may be used in both spray and brush applications. Recoatability: Awlgrip Topcoats with a full add of Pro-Cure X-138 may be recoated or taped in 6 to 8 hrs at 77 F/50% RH. Do not apply to surfaces warmer than 105 F or colder than 55 F, or attempt to cure at temperatures below 55 F. Note: Accelerators are not recommended above 85 F. Doing otherwise could impair performance.

X-138: 1 liquid ounce per 2 gallons of catalyzed topcoat adding reducer