Mixing & Reduction - Thoroughly mix the color base and G3013 Flattening Agent. Then stir in the G3010. When one homogenous mixture is obtained add the T0002 Reducer. Strain mix with a 60-100 mesh cone strainer before applying.
AWLGRIP Topcoat: Mixture for Flat Finish - 1 part by volume AWLGRIP Color Base
1 part by volume 1010 Flattening Agent
1 part by volume AWL-CAT #2 Converter
1 part by volume T0002 Reducer
Example: 8 oz. color base : 8 oz. G3013 : 8 oz. G3010 : 8 oz. T0002
AWLGRIP Topcoat: Mixture for Semi-Gloss Finish - 1 part by volume AWLGRIP Color Base
1/2 part by volume 1010 Flattening Agent
1 part by volume AWL-CAT #2 Converter
1 part by volume T0002 Reducer
Example: 8 oz. color base : 4 oz. G3013 : 8 oz. G3010
AWLCRAFT 2000 Topcoat Mixture For Flat Finish - 2 parts by volume Awlcraft 2000 color base
2 parts by volume 1010 Flattening Agent
1 part by volume Awl-Cat #2 Converter
1 part by volume T0002 Reducer
AWLCRAFT 2000 Topcoat Mixture For Semi-Gloss Finish - 2 parts by volume Awlcraft 2000 color base
1 parts by volume 1010 Flattening Agent
1 part by volume Awl-Cat #2 Converter
1 part by volume T0002 Reducer
Application Instructions - Spray application is recommended when using G3013. The friction from brush and roller applications sometimes shears the G3013 causing areas high and low gloss. If you absolutely cannot spray, rolling preferred to brushing. Awlcraft 2000 cannot be brushed or rolled. D o not apply paint materials to surfaces warmer than 105 F or colder than 55 F. Do not attempt ot to cure products below 55 F.