Hookit Dust-Free Low Profile Backup Pad 05856, 6"
Item #: 71-05856 -
Hookit Dust-Free Low Profile Sanding Disc Pads 6"
3M Hookit Dust-Free Low Profile Disc Pads measure 6 inches in diameter whith a 6 hole pattern and are designed to assist marine refinishers in sanding under rub rails, toe rails, and along chines and...
[more info...]
Availability: In Stock
Retail: $44.95
Price: $39.95
|
Availability: In Stock
Price: $47.95
|
101 Polysulfide Marine Sealant "White" 10oz
Item #: 71-06510 -
3M 101 is ideal for head sealing applications
One-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible....
[more info...]
Availability: In Stock
Retail: $29.95
Price: $18.95
|
4000 Marine Fast Cure Adhesive Sealant
Excellent for sealing between mechanically fastened joints on wood, fiberglass, metal and most plastics
4000 UV Polyether Adhesive Sealant@Body Text:Resistant to weathering, salt water and stresses caused by joint movement. White, non-yellowing formula is ideal for above and below waterline...
[more info...]
Availability: In Stock
Price: $9.95
|
4200 Fast Cure Marine Sealant
4200 Fast Cure Marine Sealant
One-part, all-purpose sealant chemically reacts with moisture and forms flexible, watertight, weather-resistant seals on joints and hardware. Can be used above or below the waterline; approximately...
[more info...]
Availability: In Stock
Price: $9.95
|
5200 Fast Cure Marine Sealant
5200 Fast Cure Marine Sealant
The fast cure version of 3M Marine Adhesive Sealant 5200 becomes tack-free in just 1-2 hours and completely cures within 24 hrs. Ideal for applications where a fast long-term seal is needed above or...
[more info...]
Availability: In Stock
Price: $12.95
|
5200 Marine Adhesive Sealant
Tenacious bonds and watertight seals above or below waterline
Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and...
[more info...]
Availability: In Stock
Price: $11.95
|
6" Stikit Gold "C" Weight Disc Roll
3M Stikit Gold 236U Disc Rolls Fre-Cut 6 inch x No Holes
Excellent for gelcoat, wood and plastic applications.
Strong "C" weight backing provides excellent support for tough aluminum oxide mineral. These discs are aggressive, sharp, fast cutting and...
[more info...]
Availability: In Stock
Retail: $54.95
Price: $39.95
|
Availability: In Stock
Retail: $214.95
Price: $136.95
|
745i Imperial Stikit Disc Rolls 6 & 8"
3M Stikit Imperial Purple 745I Disc Rolls No Hole
3M Stikit Imperial Purple 740I and 745I Imperial purple are 3M's performance class abrasives, and their best performing products. They offer the user the highest performance in rate of cut as well as...
[more info...]
Availability: In Stock
Price: $55.95
|
Availability: In Stock
Price: $59.95
|
Acryl Marine Putty - White
Item #: 71-05962 -
Designed specifically for the boat repair market, this putty is recommended for filling pinholes, scratches and other surface defects on hulls.
3M Acryl Marine Putty is recommended for filling pin holes, scratches and other surface defects on hulls. White marine putty that spreads easily and reduces chance of putty being visible through the...
[more info...]
Availability: In Stock
Retail: $28.31
Price: $18.79
|
Aluminum Restorer & Polish Cleaner, 18oz
Item #: 71-09020 -
Restores lustre to dull aluminum
3M Aluminum restorer and polish removes oxidation growth and stains and restores a lustrous appearance to bare aluminum. Use sparingly, a little bit goes a long way. We recommend testing on small...
[more info...]
Availability: In Stock
Retail: $26.10
Price: $19.79
|
Dry Guide Coat Cartridge & Kit
Item #: 71-05661 -
Dry powder with applicator used to highlight surface imperfections and sand scratches prior to finishing with abrasives. Can be used on marine fillers, primers, paints and gelcoat. Contains no solvents.
A method for identifying surface imperfections such as pinholes and deep scratches in primer. Requires no masking and there is no dry time involved. Can be used for both wet and dry sanding. Contains...
[more info...]
Availability: In Stock
Retail: $63.49
Price: $45.95
|
Finesse-It II Finishing Material
Designed for use on OEM and fully cured automotive paints. Can remove grade microfine 1500 sand scatches. Removes swirl marks after compounding while leaving a glazed finish. VOC content less than 17%.
3M Finesse-It II Finishing Material is designed for topside paint systems to remove micro-fine sanding scratches or compound swirl marks. This finishing material leaves a glazed finish. 3M Finesse-It...
[more info...]
Availability: In Stock
Price: $18.95
|
Availability: In Stock
Retail: $62.18
Price: $41.49
|
Green Corps Fibre Disc 5 & 7"
3M Green Corps Fibre Disc 5 & 7"
Green Corps Fibre Disc from 3M are has a long lasting fiber backing. Designed for paint removal and metal work. Resists loading on acrylics and are excellent for fiberglass grinding.
[more info...]
Availability: In Stock
Price: $74.95
|
Availability: In Stock
Retail: $40.29
Price: $20.95
|
High Strength Repair Filler
This high performance reinforced filler is designed to repair areas of fiberglass hulls, decks, and other parts.
3M Marine High Strength Repair Filler is for bonding, filling and fairing repairs above or below the waterline. 3M filler allows you to achieve professional repair results. These pre-mixed products...
[more info...]
Availability: In Stock
Price: $34.49
|
Hookit Hand File Board 2 3/4" X 16 1/2"
Item #: 71-05744 -
A well balanced, durable shop tool, that is resistant to most solvents
Provides a non-twisting flat sanding surface. Allows easy attachment and removal of the 3M Hookit Regalite File Sheets, 2 3/4" X 16 1/2".
[more info...]
Availability: In Stock
Retail: $59.95
Price: $39.49
|